Overview
Any Button Any Functionality allows users to customize lighting preferences by mapping supported switch press actions to any button on third-party switches, such as EnOcean or Illumra. This feature is not supported on Enlighted ERCs but will be supported in a future release.
Assigning Switch Press Actions to Buttons
Users can assign supported switch press actions to any button on third-party switches. Functions that can be mapped to buttons include turning lights on and off, adjusting dim levels, and activating preset scenes. Users can customize and save the button and scene templates and reuse them when creating Switch Groups.
By assigning supported switch press actions to any button on a switch, users can 'gang' one or more switches side by side at a single wall station. For example, at each entrance in a large room with several entry and exit points, users can change the buttons' orientation and corresponding functions, as well as save these settings as Scene or Button templates that can be reused for creating Switch Groups.
Prerequisites:
Creating Scene and Button Templates
Scene Templates
Scene templates are applied when creating a new Switch Group. A scene is a set of predefined light levels for fixtures. Users can create up to six scenes and save them as Scene templates.
For detailed information on how to create a Scene Template, refer to the Creating a Scene Template.
Button Templates
Button templates allows users to assign switch press actions to any button on third-party switches. There are15 switch press actions offered that can be configured on any button. on the third-party switches.
For more information, on how to create a Button template, refer to Creating a Button Template.
Creating a Switch Group or Cross-Gateway Switch Group
After creating the required button and scene templates, you can proceed to create Switch Groups or Cross-Gateway Switch Groups (for single floor). Refer to the Creating a Switch Group or Cross-Gateway Switch Groups for additional information.
The Any Button Any Functionality feature enables users to map switch press actions to third-party buttons for customized lighting control.
