Users can create button templates and apply them when creating a Switch Group. This approach saves time and helps users customize lighting preferences by mapping long or short press actions to Any Button Any Function  on third-party switches, such as  EnOcean and Illumra. This feature will be supported in a future release of Enlighted ERCs.

For example, a conference room may need brighter light when someone enters the room and presses the light switch. The user can customize button 1 to turn lights on to maximum scene level when short pressed.
 

Default Template

You can only program the first four buttons. Buttons 5 through 8 are disabled and Not Assigned, so any actions do NOT work on these buttons.  

The following switch short and long press actions are available to be programmed to any button on the Switch.

Short Press (Press and release) 

1. Turn Lights on to Max Scene Level — The lights will turn on to the scene's maximum light level. For instance, if the user specifies a max. 65% of the light level for fixtures, the lights will automatically turn on and stay at 65%.

2. Turn Lights Off — Turns off the lights, and brightness will be set to 0.
3. Select Scene Number — This allows the user to select any scene from the list of stored scenes.
4. Set CCT to Max Level — Raises the CCT to its maximum level (cooler); applicable only for Tunable White fixtures. 
5. Set CCT to Min Level — Reduces the CCT to a minimum level (warmer); applicable only for Tunable White fixtures.
6. Rotate to the Next Scene — Changes to the next scene.
7. Return to Auto Profile — Returns the lights to their current profile settings.
8. Toggle ON/OFF — The fixture reverses its state. If ON goes to OFF and vice versa.
9. No operation - This action assigns no action to a press.

Long Press (Press and hold for 2-3 sec)

1. Dim lights up — Increases the light level gradually.
2. Dim lights down — Dims the light level gradually.
3. Ramp CCT up (increase) — Raises the CCT level gradually (cooler); applicable only for Tunable White fixtures.
4. Ramp CCT down (decrease) — Decreases the CCT level gradually (warmer); applicable only for Tunable White fixtures. 
5. Dim Lights to Min Scene Level — Reduces the brightness of the lights to the minimum level specified in the profile settings. The light output level can be reduced by 10% or 1%.
6.  No operation - This action assigns no action to a press. 

Creating a Button Template  

To access the New UI, toggle the New User Experience button. In case you don't see the toggle button to switch between the New UI and Classic UI, please reach out to Enlighted Support to enable it for your Manage application. 

1. Go to Template Configuration menu, which is available in the left navigation panel.
2. Select the Button Template option.
3. Click Create above the Button Templates table. 
   
   
   
   The Create Button Template pop-up dialog box will be displayed. Type a template name and select an instance from which you want the new template to be cloned from the dropdown list. 
   
   
4. Select the desired action from the dropdown box for each Short Press and Long Press button and click Create.  The Button template is saved and is displayed in the list of templates.

Viewing the Default Template 

To access the New UI, toggle the New User Experience button. In case you don't see the toggle button to switch between the New UI and Classic UI, please reach out to Enlighted Support to enable it for your Manage application. 

1. Go to the Template configuration, available in the left navigation panel.
2. Select the Button Templates option.
3. Click View.
   
   
   
   The View Button Template Dialog Box is displayed.
   
   

Editing and Deleting a Button Template

• Click the Edit icon for the Button Template you wish to edit. The Edit Button Template screen is displayed. Make the updates as required in the Edit Scene Template and click Save.
  
• To delete a Button template, click the delete icon . In the confirmation window, click Yes to delete the button configuration.