IoT Ready Profile 0 Phase Cut Dimmable Power Controllers

The table below lists the Profile 0 Phase Cut Dimmable Power Controllers  verified as compatible with Enlighted's Gen 5 2-wire sensors. For viewing the list of Enlighted tested examples of 0-10V Profile 0 dimming LED drivers, refer to the article IoT Ready Profile 0, 0-10V Dimming LED Drivers. Note that these drivers follow similar requirements to Profile 0 LED drivers.

Also, see the Profile 0 Driver Requirements Specs and refer to a typical Profile 0 Driver with the SU-5 Sensor line diagram for additional information.  The Driver Connectivity Options show how to connect SU-5 sensors to CU and LED drivers.  

Note: The drivers listed in the following table are not the only list of compatible drivers and controllers that can work with the Enlighted IoT system; these are examples of some of the products available in the market that Enlighted has tested and used in previous projects. Also, because these are not Enlighted products, Enlighted has only performed the functionality verification that the Enlighted IoT system would need and no further. The Enlighted needed features set may only represent a subset of what the drivers can do in applications not covered by the Enlighted IoT system feature set. Therefore, we recommend that the fixture designer evaluate the drivers' full performance, reliability, and conformance to safety, electrical code, and other industry standards that the fixture needs to meet.

0-10V Phase Cut Dimmable Power Controllers