Micro Sensor, 8-pin, (SU-5E)

The Enlighted Micro Sensor, 8-pin, is our fifth-generation sensor, delivering all the functionality of our other sensors in a minimally sized package.

Spec Sheet

View or download the Micro Sensor, 8-pin, Spec Sheet: English rev.21 | German rev.19  

Install Guide

Other Installation Options

If you have purchased the Hard Ceiling Mount Carrier (HCMC-SU-5E) as an optional component for installing the sensor, refer to the following articles:

The Mounting Case provides a flexible solution for mounting the SU-5E Micro Sensor on a variety of surfaces either attached directly to or separate from a lighting fixture.

The Micro Sensor Blinder (MASK-SU-5e-50) is an accessory that can be ordered with Gen 5 Micro Sensors (SU-5E) to customize the Passive Infrared (PIR) Field of View (FoV). This accessory is shipped as a 50-piece multipack of 25 pieces of Half Mask blinders and 25 pieces of crescent Half Mask blinders.

Maintenance

FAQs


 

Downloads:

High Bay Sensor, 8-pin, (SU-5S-H)

The Enlighted High Bay Sensor, 8-pin, is designed for indoor applications with high ceilings such as warehouses, atriums, and manufacturing facilities.

Spec Sheet

View or download the High Bay Sensor, 8-pin, Spec Sheet: English rev.14 | German rev.12

Install Guide

FAQs

 

Downloads:

Ruggedized Sensor, 8-pin, (SU-5S-xRx)

The Enlighted Ruggedized Sensor, 8-pin, is designed for outdoor applications, parking structures, and damp or wet locations that require a sensor with an IP65 rating.

Spec Sheet

View or download the Ruggedized Sensor, 8-pin, Spec Sheet: English rev.15 | German rev.13

Install Guide

FAQs

Download:

Low Bay Ruggedized Micro Sensor, (SU-5E-LR)

The Low Bay Ruggedized Micro Sensor, 8-pin, is designed for outdoor applications, parking structures, and damp or wet locations that require a sensor with an IP65 rating. 

Spec Sheet:

Install Guide:

FAQs

 


Downloads:

Micro Sensor with 2-wire Adaptor (KIT-SU-5E-D)

The Enlighted Micro Sensor with 2-wire Adaptor includes our fifth-generation Micro Sensor and an adaptor cable that supports direct connection to 2-wire compatible drivers.

Spec Sheet: 

View or download the Micro Sensor with 2 Wire Adaptor, Spec Sheet: English rev.17 | German rev.15

Install Guide:

FAQs

Downloads:

High Bay Sensor, 2-wire, (SU-5S-2W-H)

The Enlighted High Bay Sensor, 2-wire, supports direct connection to 2-wire compatible drivers. The sensor is designed for indoor applications with high ceilings such as warehouses, atriums, and manufacturing facilities.

Spec Sheet

View or download the High Bay Sensor, 2-wire, Spec Sheet: English rev.11 | German rev.09 

Install Guide:

Fixtureless Sensor

Besides using the ‘Enlighted 2-wire’ SU-5S-2W-H (High Bay) sensors for connecting to drivers in fixture lighting control applications, you can also use the SU-5S-2W-FL sensors in installations where the sensor is NOT connected to any fixture drivers or ballasts (Fixtureless sensors).  

For additional details, see 2-wire Fixtureless Sensors.

FAQs

Downloads:

Ruggedized Sensor, 2-wire, (SU-5S-2W-xRx)

The Enlighted Ruggedized Sensor, 2-wire, supports direct connection to 2-wire compatible drivers. The sensor is designed for outdoor applications, parking structures, and damp or wet locations that require a sensor with an IP65 rating.

Spec Sheet

View or download the Ruggedized Sensor, 2-wire, Spec Sheet: English rev.13 | German rev.11

Install Guide:

Fixtureless Sensor

Besides using the ‘Enlighted 2-wire’ SU-5S-2W-xRx-FL (High Bay) sensors for connecting to drivers in fixture lighting control applications, you can also use the SU-5S-2W-xRx-FL sensors in installations where the sensor is NOT connected to any fixture drivers or ballasts (Fixtureless sensors).  

For additional details, see 2-wire Fixtureless Sensors.

FAQs

Downloads:

Surface Sensor, USB, (SU-5i-USB)

The Surface Sensor, USB, available in a minimally-sized package, provides users with real-time occupancy availability. The Surface Sensor, optimized for easy deployment, mounts to ceiling tiles and under desks.

View or download the Surface Sensor, USB, Spec Sheet: English rev.09 

Recommended articles

We recommend that you review the Surface Sensor (SU-5i-USB) Design Guidelines before installing or using the sensor. To install the sensor on the underside of a desk or a ceiling tile, refer to the Surface Sensor, USB, (SU-5i-USB) Installation Guide. 

For obtaining location and occupancy data from the sensors, you will need the IoT Sensor license. For example, if you have commissioned 500 Surface sensors, you need to enable BLE beaconing of the commissioned sensors and purchase at least 500 IoT sensor licenses on Manage. In addition to the IoT Sensor license,  you will need to purchase additional API software licenses for getting real-time occupancy or location-based data from the sensors via APIs.

For a list of Surface Sensor most commonly asked questions, refer to the Surface Sensor FAQs.

Download: 

Micro Sensor Mounting Case (CASE-SU-5E)

The Mounting Case provides a flexible solution for mounting the SU-5E Micro Sensor on a variety of surfaces either attached directly to or separate from a lighting fixture.

View or download the Micro Sensor Mounting Case, Spec Sheet: English rev.04

Recommended article:

Downloads:

Micro Sensor Tile Mount Carrier (TMC-SU-5E)

The Tile Mount Carrier is a flexible mounting solution for the SU-5E Micro sensor in acoustical ceiling tile installations. It provides adequate framing around the sensor in the tile securely supporting it with a large backup nut.

View or download the Micro Sensor Tile Mount Carrier, Spec Sheet: English rev.03 | German rev.03

Recommended articles:

Downloads:

Hard Ceiling Mount Carrier (HCMC-SU-5E)

The Hard Ceiling Mount Carrier is a flexible mounting solution for the SU-5E Micro sensor, and SU-5S Ruggedized sensor.

View or download the Hard Ceiling Mount Carrier, Spec Sheet: English rev.04 | German rev.04

Recommended articles:

Downloads:

Micro Sensor Blinder (MASK-SU-5e-50)

The Micro Sensor Blinder (MASK-SU-5e-50) is an accessory that can be ordered with Gen 5 Micro Sensors (SU-5E) to customize the Passive Infrared (PIR) Field of View (FoV). This accessory is shipped as a 50-piece multipack of 25 pieces of Half Mask blinders and 25 pieces of crescent Half Mask blinders.

The Micro Sensor (SU-5e) incorporates an optical Fresnel lens that works with the digital Passive Infrared (PIR) sensor to detect occupancy and motion.  When the Micro Sensor is deployed as recommended, the maximum sensing distance for Major motion is 10 feet radius. Minor motion is 8 feet radius when the sensor is mounted at 8.5 feet high. Refer to the Micro Sensor Spec Sheet for the sensor coverage patterns. 

However, if you would like to block the sensor Field-of-view (FoV)  for any unwanted hallway traffic when a person passes near or outside the region, use the blinder devices (MASK-SU-5e-50) to block detection. For example, if you would like to turn on room lights when a person enters the room, using the blinder will reduce false detection and FoV when persons walk by the room in the adjacent corridor. The blinder limits the size of the area being monitored. The blinder can be selectively positioned on any side of the lens (left, right, top, or below) to restrict the FoV. The blinder comes in two shapes, as shown below. 

Half Mask Blinder                               Crescent Half Mask Blinder 

Blinder1.png                                  Dip_blinder.png

Half Mask Blinder: Sensor Coverage Pattern 

SU-5E_Coverage.png

Crescent Half Mask Blinder: Sensor Coverage Pattern

SU-5E_Coverage_V4.jpg

Positioning the Blinder 

Slowly pull the sensor installed in the ceiling down from its holder and slide the blinder on top of the lens. Gently guide the sensor cable and push the sensor into the carrier until it securely clicks into the carrier. 

Refer to the Micro Sensor, 8-pin, (SU-5E) Installation Guide for installing the sensor.