Logo

Technical Help Center

Submit a request Sign in
  1. Enlighted Inc
  2. Hardware Devices and Solutions
  3. Solutions
  4. Lighting and Electrical Solutions

Articles in this section

  • IoT Ready Profile 0 Driver Requirements Specification
  • Enlighted IoT Ready Drivers and Power Controllers
  • IoT Ready 2-wire Sensor Compatible (DALI) Drivers
  • IoT Ready Profile 0, 0-10V Dimming LED Drivers
  • IoT Ready Profile 0 Phase Cut Dimmable Power Controllers
  • Driver Connectivity Options
  • Energy Metering with Enlighted Sensors
  • Interfacing Enlighted Sensors with Triac and Phase-Cut Dimmable Fixtures using EcoSense Linear Dimming Control
  • Interfacing Enlighted Sensors with Triac and Phase-Cut Dimmable Fixtures using BOCA Flasher Smart Dimmer Control
  • Control Unit (CU-4E-FMH) EMC Considerations
See more

Division 26 Digital Network Lighting Controls Specs Section 260943.13

September 01, 2022 18:01 Updated
Print Follow

Summary

The following specification details the minimum compliance and related criteria for a complete and fully operational distributed intelligence sensor and lighting control system. The system is not required to be directly monitored by the building automation system.

  • Enlighted - DIV260943.13 - Network Lighting Control Specification_v26-06012022.docx
    (70 KB)
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Related articles

  • Manage Riser Diagram (03168-02)
  • Low Bay Ruggedized Micro Sensor, (SU-5E-LR)
  • OEM Specification Guide
  • IoT Ready Profile 0 Driver Requirements Specification
  • Emergency Lighting Solutions

Comments

Article is closed for comments.

© 2023 Enlighted Inc. All Rights Reserved.

Theme design by Lotus Themes

All product names, trademarks, and registered trademarks are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.

Download Close