The Enlighted sensors support three BLE modes: Off, Beacon, and Scan. Based on the mode that is selected, the sensors are displayed with the appropriate icon on the floor plan. To view the sensors' Bluetooth Mode,
- Click the Facilities tab, select a Floor from the left panel.
- Select the Floor Plan tab.
- Select the Bluetooth Mode from the View option.
The sensors are displayed with the appropriate icon on the floor plan.
| BLE Mode | Assign Mode to Fixture | Icon Displayed on the Floor Plan |
| Off | BLE Mode is off | BLE icon off  |
| Beacon | The sensor sends out BLE signals | Beacon icon  |
| Scan | Sensor scans for BLE signals | Scan icon  |
To set or turn off BLE mode, refer to the article Set Bluetooth (BLE) Mode.
Comments
Article is closed for comments.