View Sensor Details

You can view sensors based on their details such as

• View Sensors by Fixture Name
• View Sensors by MAC Address
• View Sensors by Fixture ID
• View Sensors in an Area
• View Sensors by Fixture Profile

Refer to the article View Floor Plan to bring up the Floor plan and then follow the instructions below to view sensors by each category.

View Sensors by Fixture Name

To view sensors by fixture name on the floor plan,

1. In the Facilities left panel, click on the floor name. On the floor plan display, underneath the Floor Plan tab, is a drop-down list labeled View.
2. Select Fixture Name in the drop-down. The floor plan displays the sensors with their respective names. 

View Sensors by MAC Address

The floor plan displays the Sensor with its six octet MAC address. To view sensors by MAC address,

1. In the Facilities left panel, click on the floor name. On the floor plan display, underneath the Floor Plan tab, is a drop-down list labeled View.
2. Select Fixture MAC in the drop-down. The floor plan displays the sensors with their respective MAC addresses. 

View Sensors by Fixture ID

The floor plan displays the sensors with their unique ID. To view sensors by Fixture or Sensor ID,

1. In the Facilities left panel, click on the floor name. On the floor plan display, underneath the Floor Plan tab, is a drop-down list labeled View.
2. Select Fixture ID in the drop-down. The floor plan displays the sensors with their respective Fixture ID. 

View Sensors in an Area  

This screen displays all the fixtures associated with an area. Refer to the article View Area Occupancy.

View Sensors by Fixture Profile

This screen displays all the fixtures and its lighting profile instance. To view the sensors by Fixture Profile,

1. In the Facilities left panel, click on the floor name. On the floor plan display, underneath the Floor Plan tab, is a drop-down list labeled View.
2. Select Fixture Profile in the drop-down. The floor plan displays the sensors and its light profile name.