Device Status Icons

This article describes the device's health and status.  In the Floor Plan view, select the corresponding device Status from the View dropdown box to view the health and status of the Enlighted devices. The icons displayed on the Floor Plan show the following device statuses.  To display a floor plan, refer to the article View Floor Plan.

Viewing the Device Status

You can check the last status of a device by hovering the cursor over its icon. If the cursor remains over the icon for three seconds, a request is sent to the device to obtain its current status. If the device responds, then the popup is updated, and the background changes to green. If no response is received within five seconds, the background changes to pale pink.

Sensor Status

In the Floor plan view, select Sensor Status from the View dropdown box. The sensor icons show the communication status between a sensor and the Manage server.

sensor_status_2.png

Icon Description Communication Status
Connectivity_Healthy.png Healthy Communication last occurred no longer than 15 minutes ago. 
Connectivity_PowerOff.png Power Off Communication last occurred between 15 minutes and seven days ago.
Connectivity_Problem.png Problem No communication has occurred in the last seven days.

Hover the cursor over an individual sensor to check the status.  

Sensor_Latest_update.png                 

  1. Shows the light level
  2. Ambient light
  3. Occupancy
  4. Temperature
  5. The last line shows the Sensor name, light profile name, and operation mode. For example, the sensor name is Sensor00ced0, the profile name is Open_officemax3_amw1, Auto mode of operation.

When no response is received from the sensor within five seconds, the popup background changes from green to pale pink.

Pinkbackground.png

Fixtureless sensors are not connected to a fixture to control lighting; the light level and wattage (W) are not displayed. The Sensor name is followed by an (NF-No Fixture), indicating a fixtureless sensor. Fixtureless sensors collect data for Enlighted applications. 

Fixtureless_sensor.png

Plugload Status

Indicates the time elapsed since the last communication by the Manage server with the Plugload.

View_Plugload_Status.png

The plugload icons indicate their communication status. 

Icon Description Communication Status
pl_connected_on.png Connected on Communication last occurred no longer than 15 minutes ago.
pl_disconnected.png Not Connected No communication has occurred in the last seven days.
pl_connected_off.png Connected off Connected, but no communication occurred. 
plug_load_connected_on_hopper.png Plugload Hopper Plugload designated as a hopper; status on and healthy.
plug_load_disconnected_hopper.png Plugload Hopper Plugload designated as a hopper; status not connected.

Obtain the status of an individual plugload by hovering the cursor over its icon.  

Plugload_Latest_update.png

Gateway Status

Displays the name of the gateway and the number of sensors assigned to it.

gateway_status_2.png

The gateway icons indicate their communication status. 

Icon Description Communication Status
Gateway_Connected.png Connected Communication last occurred no longer than 15 minutes ago.
Gateway_Idle.png Idle Communication last occurred between 15 minutes and seven days ago.
Gateway_Not_Connected.png Not Connected No communication has occurred in the last seven days.

Hover the cursor over an individual gateway to obtain its status.

Gateway_Latest_update.png

Switch Icons

The floor plan view displays the following switches: Virtual switches, EnOcean 2-button and 4-button switch, and Enlighted Room Controls (ERCs) switch. There is a single icon for each since there is no status associated with a switch.

ERC_icons_2.png

Icon Description
virtual_switch.png Virtual switch icon
EnOcean_Switch_2.png EnOcean 2-button switch
EnOcean_Switch_4.png ERC/EnOcean 4-button switch

ERC Battery Level

The ERC icon indicates its battery level as Normal, Low, or Critical.

The following table describes the ERC icon communication status.

Icon Description Communication Status
erc_healthy.png Normal ERC Battery level normal
erc_low.png Low ERC Battery level low
erc_off.png Off ERC Battery not available
erc_trouble.png Critical ERC Battery level critical

Sensor Hopper Icons

The following icons describe the sensor designated as a hopper. See Configure Sensors as Hoppers.

Icon Description Communication Status
ConnectivityHealthyHopper.png On Sensor designated as a hopper; status on and healthy.
ConnectivityPowerOffHopper.png Off Sensor designated as a hopper; status powered off.
ConnectivityProblemHopper.png Problem Sensor designated as a hopper, and it has a problem.

Other Device Icons

Three other additional icons may be present on a floor plan. They are used to locate unmanaged fixtures and the on-prem Manage server.

Icon Description                
Unmanaged_Fixture.png Unmanaged fixture icon
Unmanaged_Emergency_Fixture.png Unmanaged emergency fixture icon
EM_Server.png Manage server icon
Fixtureless.png Fixtureless sensor icon
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Article is closed for comments.