Fixtureless Sensors FAQ


What are Fixtureless sensors?

Fixtureless sensors are not connected to any lighting fixture. The fixtureless sensors increase the sensor density in a facility collecting data and improving the accuracy for Enlighted applications, such as Where and Space, for indoor location and mapping for asset tracking and occupancy-based utilization. 

Can Fixtureless Sensors provide motion triggers to lighting? 

Yes. Fixtureless sensors can be used to provide motion triggers as part of a motion group.  

For cove lights or LED Strips in large areas covered by lights and fewer drivers at a greater distance, can you send an ON/OFF command to a Control Unit connected to another sensor that depends on the occupancy status by a fixtureless sensor installed in the vicinity?

Yes. Fixtureless sensors can be used to provide motion triggers as part of a motion group.

How do I order Fixtureless Sensors?

There are three available options for fixtureless sensors, depending on the form factor needed:

  • Micro Sensor:  Order SU-5E plus CBL-5E-PWR-30N.  Note that this solution IS polarity sensitive.
  • Ruggedized Sensor:  Order SU-5S-2W-xRx-FL.  Note that this solution is NOT polarity sensitive.
  • Highbay Sensor: Order SU-5S-2W-H-FL. Note that this solution is NOT polarity sensitive.

Refer to the following articles:

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Article is closed for comments.