Ruggedized Sensors FAQ

Questions

• What is the maximum operating temperature of the sensor?
• Can I paint the housing of the High Bay Sensor (SU-4S/SU-5S), Ruggedized sensor (SU-4S-HRW, SU-5S-HRW)?
• Is the Ruggedized Sensor, 2-wire,  (SU-5S-2W-HRW) waterproof?
• What are the default dim settings for the Ruggedized sensors?

What is the maximum operating temperature of the sensor?

• Maximum operating temperature is found in the sensor's specification sheet.  For ruggedized sensors the operating temperature range is -31 to 185 degrees Fahrenheit /-35 to 85 degrees Centigrade. See Ruggedized Sensor (SU-5S) Spec Sheet for details.

Can I paint the housing of the High Bay sensor (SU-4S/SU-5S), Ruggedized sensor (SU-4S-HRW, SU-5S-HRW)?

• Yes, follow the process below:

  1. Mask the lens.
  2. Use an anti-static air gun to remove any static electricity that may be present.
  3. Use an alcohol wipe to clean the surface to be painted.
  4. Use a polyurethane-based primer on the cleaned surface.
  5. Use any acrylic-based paint for the desired color.

Is the Ruggedized Sensor, 2-wire, (SU-5S-2W-HRW) waterproof?

• Enlighted’s Ruggedized Sensor enclosure is IP65 rated as "dust tight" and protected against water projected from a nozzle.” Refer to the 2-Wire Ruggedized Sensor (SU-5S-2W-HRW) Spec Sheet for information.

What are the default dim settings for the Ruggedized sensors?

Ruggedized SU5 sensors shipped with firmware v5.0.20 have 65% as the default light setting. For Enlighted One, the default setting should be 100%. For more information, refer to the following articles.

• Gen 5 Sensor Release Notes and Image for FW 5.0.20
• Enlighted One Quick Programming Guide
• Enlighted One Lighting Behavior