View Switch Group

Users can easily and quickly set up an Enlighted lighting system using the Switch Group feature to program a switch. You can add sensors to a group to turn on/off the group of lights with a switch.  To create a Switch Group, refer to the Create Switch Group article.  

After the Switch Groups are created, you can see all the Switch groups on the Floor Plan. Each Switch Group is grouped by color on the Floor Plan to identify sensors belonging to a group quickly.  The information Legend displays the list of devices and their corresponding icons.

  1. Select a floor in the Facilities left panel. 
  2. Select the Floor Plan tab.
  3. In the View drop-down list, select Switch Group.
    All Switch Groups that have been created on the floor plan are displayed. Sensors belonging to a group are associated with a color. For example, all sensors in blue color belong to the Switch Group North_Open_office. 
  4. Click on 'i' to open the Legend to identify the device type. 

    SwitchGrp.png

Sometimes, you may want to determine which fixtures belong to a specific Switch Group. To determine the sensors belonging to a specific Switch Group, for example, North_Open_office, follow the procedure below.

  1. Select a floor in the Facilities left panel. 
  2. Select the Floor Plan tab.
  3. In the View drop-down list, select Switch Group.
  4. Select a Switch Name in the drop-down list next to it. All sensors in the group, 'North_Open_office' associated to the switch are displayed on the floor plan.

SwitchGRp_Office.png

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Article is closed for comments.