Plugload Load Energy Savings

The plugload baseline energy consumption is set when a plugload is commissioned. The savings from energy consumption are calculated with reference to the predefined established baseline load. If you do not set a baseline, the system will estimate the baseline. It can later be changed by following the steps below:

  1. Select the Devices tab.
  2. Select the Plugloads tab. The plugload table lists all discovered and commissioned plugloads. To Commission and Discover Plugload, refer Adding Plugload.
  3. Once the Plugload is commissioned, the Edit option is available. Select a plugload instance from the table, and click the Edit button in the Action column.

Edit_Plugload_Energy_Savings.png

  1. Type the Plugload Baseline Load value in Watts in the Plugload Details pop-up screen.
  2. Click the Apply button to save changes.

Plugload_Baseline_Value.png

Manage will use this Baseline Load to calculate energy savings.

Recommended articles:

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Please sign in to leave a comment.