Assign Profile to Sensors

Before you assign a light profile to sensors, ensure that the profile exists or see how to create or edit a profile. To assign a profile to sensors, select a floor in the facility left panel.

Click the Floor Plan tab and select one or more sensors on a floor plan display, and right-click—Select Assign Profile in the resulting pop-up.

assign_profile_1.png

In the Assign Profile window, select the required profile instance, and click Apply to assign a profile instance to the selected fixtures. 

assign_profile_2.png

You can also assign a profile to a sensor from the Fixture Details screen. Double-click a sensor on the floor plan and assign a profile from the Current Profile drop-down list.

assign_profile_3.png

If you need to modify the light level settings of a fixture, you may edit the values in the profile. See Edit Profile.

Recommended articles:

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Article is closed for comments.