In the Enlighted Manage (EM), the organization hierarchy includes campuses, buildings, floors, and areas. An area on a floor is a grouping of a subset of devices including Gateways, Sensors, Enlighted Room Control (ERCs) switches, Plug Loads, etc., on a floor. Areas are assigned on a floor based on usage or a specific purpose profile of the area in EM.
This API returns details of all areas on a floor. The Area ID returned for each area is used as the primary identifier in other API calls.
|em_ip_address or hostname||The Manage’s IP address or hostname|
|floor_id||Floor identifier. Use the Get All Floors API, or in EM, select Facility > Floor > in the left panel, and click the Settings tab to obtain the Floor ID.|
|Id**||Area identifier (**used as the primary identifier in other API calls)|
|name||Area name as described in the EM|
|description||Area description as described in the EM. The field will be empty if there is no description entered in the EM.|
The area has been activated as a zone sensor area. The area starts reporting consolidated occupancy status information from individual sensors. Note that the zone sensor license must be purchased and available for the sensors to report occupancy information. Otherwise, occupancy data is not reported by the sensors.
true – Sensors in the area are enabled as zone sensors.
Send a request to return the list of all areas on the first floor with ID ‘1’. For example, if the first floor has two areas: Hardware and Software, the details of the areas along with their corresponding Area IDs ‘9’ and ‘27’ will be returned as shown below. The Area IDs are used as the primary identifiers in other API calls.
Article is closed for comments.